hastelloy c276 plate

  • Home
  • hastelloy c276 plate

Most reliable Hastelloy Plate suppliers, 2.4819 Hastelloy C276 Sheet, hastelloy c276 plate manufacturers in India, suppliers of SB 575 Hastelloy C276 Strip

Biggest supplier of Alloy Hastelloy C276 Coil, check UNS N10276 Hastelloy C276 Foil Price in India, Manufacturer of Alloy C276 Plate, Hastelloy C276 SB575 4mm Thick Plate, Stockist of Hastelloy Alloy C276 Sheet in Mumbai, India

Although there are several Hastelloy variations of the nickel based material , Hastelloy C276 SB575 4mm Thick Plate is by far the most widely used alloy across various industries. The 2.4819 Alloy C276 Flat Plate is widely utilized in environments which have the most severe conditions. . Therefore the Haynes Alloy C276 N10276 Polished Plate is used in industries such as pulp and paper production, chemical processing, pollution control, industrial and municipal waste treatment, as well as for the recovery of sour natural gas in sour wells.


hastelloy c276 plate
hastelloy c276 plate
Nickel Alloy C276 Sheet
Nickel Alloy C276 Sheet
ASTM B575 UNS N10276 Strip
ASTM B575 UNS N10276 Strip

 

Table Of Content

One Stop Shop For All hastelloy c276 plate suppliers india, importer of ASTM B575 C276 Hastelloy 2D Plate, Hastelloy C276 Alloy Strip Tape in India, manufacturers of Alloy C276 Hastelloy Hot Rolled Plate, Check C276 Hastelloy Shim Sheet Price List

 

Hence, these hastelloy c276 plate suppliers in Mumbai suggest using this alloy for applications in general corrosive service.The low carbon content in the Hastelloy C276 Alloy Strip Tape  is known to minimize carbide precipitation during welding operation in order to maintain corrosion resistance to structures in an as welded condition . This  Alloy C276 Hastelloy Hot Rolled Plate is resistant to the formation of grain boundary precipitates in the heat affected welded zone.  Thus, the hastelloy c276 plate suppliers in Chennai is suitable for use in most chemical process application in an as welded condition.

The materials used in the manufacture of Hastelloy C-276 UNS N10276 Cold Rolled Plate must not only confirm to the chemical requirements, but also the mechanical requirements as specified in the ASTM B575 standard . With regards to the mechanical properties of the hastelloy c276 Plate, this particular alloy needs to conform to the required tensile properties. The parameter of these tensile strength properties for this superalloy is inclusive of the Hastelloy C276 Grade Shim Stock materials tensile strength, yield strength, elongation, as well as its Rockwell hardness. Further the produced C276 Hastelloy Shim Sheet and strip needs to also conform to the specified grain sizes.

compare Hastelloy C276 Plate price with Hastelloy C22 Plate price list

 

What is Hastelloy C276 Plate?

ASTM B575 is a specification which covers alloy forms produced in the form of ASTM B575 C276 Hastelloy 2D Plate, sheets, along with strip. In this case, the ASTM B575 specified Hastelloy UNS N10276 Polished Cold Drawn Plate  is chemically a low carbon based nickel alloy. Apart from nickel, the Nickel Alloy C276 Clad Plate additionally contains chromium and molybdenum, which in turn give the alloy its corrosion resistance properties especially against pitting and crevice corrosion in reducing environments. And chromium offers resistance against oxidizing media.

 

Specification of Hastelloy C276 Plate

Grade ASTM B575 UNS N10276, Hastelloy C276 - UNS N10276 - ALLOY C-276 (Ni/ 15Cr/ 16Mo/ 4W)
Type Foils, Coils, Plate, Strip, Sheet, Flats, Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Blank (Circle), ,Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate
Alloy Hastelloy C276 Plate Thickness 0.3 to 1200 mm or as required
C276 Hastelloy plate Width 0-2500mm or as required
ASTM B575 Alloy C276 Plate Length 0-12mm or as required
ASTM B575 Alloy C276 Plate surface BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B575 Alloy C276 Plate, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror etc.
UNS N10276 Hastelloy C276 Plate Process Hot/ Cold Rolled

 

Other Useful Information of Hastelloy C276 Plate for buyers

ASTM B575 Alloy C276 Plate, Sheet and Strip
ASTM B 575/B 906 & ASME SB 575/SB 906, ISO 6208, DIN 17750, VdTÜV 400/12.98
Hastelloy C276 Plate standards and approvals
  • ISO 15510
  • EN 10051
  • EN ISO 18286
  • EN 10088-1
  • ASTM A 480
  • EN ISO 9445
  • ASME IID
  • ASTM A 959
Tolerances of width and thickness
  • EN 10151 ASTM B575 Alloy C276 strip for springs
  • EN 10258 (formerly DIN 59381)
  • EN 10088 ASTM B575 Alloy C276 strip (general)
UNS N10276 Plate Hardness Half Hard, Soft, Spring Hard, Quarter Hard, Hard ASTM B575 Alloy C276 Sheet suppliers
Standard ASTM B575 Alloy C276 Plate & Sheet Sizes

1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm

  • Hot rolled C276 Hastelloy plate 3.0–10.0 mm
  • Cold rolled C276 Hastelloy plate 0.5-6.4 mm
Availability of ASTM B575 Alloy C276 Foil sizes
  • Width: Up to 500 mm (19.5 in)
  • Thickness : 8-100 microns (0.00031-0.004 in)
  • Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Plasma profiles As per customer's drawings
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Laser Plate Cutting
  • Oxy-propane Flame Cutting
Value added services for ASTM B575 Alloy C276 Coil
  • Blanking
  • Slitting
  • Cut-to-length
  • Polishing
Value added services for ASTM B575 Alloy C276 Plate Waterjet cutting, Laser cutting, Bending and mechanical processing, Plasma cutting, welding, edge preparation, sawing and shearing.
Hastelloy C276 Plate Origin European Origin, Indian Origin, Japanese Origin
Manufacturer & exporter of
  • Alloy Hastelloy C276 Clad plate: Alloy Hastelloy C276 Clad plate is a composite steel plate made by bonding UNS N10276 Hastelloy C276 plate, etc.
  • C276 Hastelloy Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width;
  • ASTM B575 Alloy C276 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
  • ASTM B575 Alloy C276 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.
Test SGS testing, UT, TUV etc
Packing of Hastelloy C276 Plate Bundles with waterproof cloth outside or plywood box
Why buy ASTM B575 Alloy C276 Plate from SS Steel CG?
  • EN 10204 3.1
  • Free sample
  • Free quote
  • NABL Approved Lab Reports
  • Mill Test Certificate is supplied with shipment.
  • Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
  • Minimum Nitrogen content and Ferrite Count Test
  • Any third party inspection is accepted.

 

Alloy C276 Plate Price in India

Price list of Hastelloy C276 Plate in India UNS N10276 Hastelloy C276 Plate Price in India (INR) C276 Hastelloy plate Price in UK Pound sterling Alloy Hastelloy C276 Plate Price in UAE Dirham
Hastelloy C276 Plate-135 Mm Od X 6mm Thk INR 3,793 41.09 UK Pound sterling 196.72 UAE Dirham

This is an approximate Cost of C276 Hastelloy Sheet in India. For factory price buy directly from Hastelloy C276 Plate manufacturers in India, check latest ASTM B575 Alloy C276 Plate price list & stock sizes please mail us.

 

Types of Hastelloy C276 Plate

C276 Hastelloy plate
C276 Hastelloy plate
ASTM B575 Alloy C276 Sheet
ASTM B575 Alloy C276 Sheet
UNS N10276 Hastelloy C276 Foil
UNS N10276 Hastelloy C276 Foil
Alloy Hastelloy C276 Coil
Alloy Hastelloy C276 Coil
ASTM B575 Alloy C276 Precision Strip
ASTM B575 Alloy C276 Precision Strip
Alloy Hastelloy C276 Strip Tape
Alloy Hastelloy C276 Strip Tape
C276 Hastelloy Shim Sheet
C276 Hastelloy Shim Sheet
ASTM B575 Alloy C276 Perforated Sheet
ASTM B575 Alloy C276 Perforated Sheet
UNS N10276 Hastelloy C276 Chequered Plate
UNS N10276 Hastelloy C276 Chequered Plate
Alloy C276 Nickel Clad Plate
Alloy C276 Nickel Clad Plate
Alloy Hastelloy C276 Shim Stock
Alloy Hastelloy C276 Shim Stock
Hastelloy C276 Superalloy Mesh Plate
Hastelloy C276 Superalloy Mesh Plate
2.4819 Hastelloy C276 Hot Rolled Plate
2.4819 Hastelloy C276 Hot Rolled Plate
Hastelloy C276 Din 2.4819 Cold Rolled Sheet
Hastelloy C276 Din 2.4819 Cold Rolled Sheet
Hastelloy Alloy C276 Checker Plate
Hastelloy Alloy C276 Checker Plate
Hastelloy C276 Nickel Alloy Cold Rolled Plate
Hastelloy C276 Nickel Alloy Cold Rolled Plate
Hastelloy C276 Rolling Plate
Hastelloy C276 Rolling Plate
Alloy Hastelloy C276 Polished Plate
Alloy Hastelloy C276 Polished Plate
C276 Hastelloy Quarto Plate
C276 Hastelloy Quarto Plate
ASTM B575 Alloy C276 Flat Sheet
ASTM B575 Alloy C276 Flat Sheet

 

ASTM B575 Alloy C276 Plate melting range

ASTM B575 Alloy C276 Plate melting range
°F : 2415-2500
°C: 1325-1370

 

UNS N10276 Hastelloy C276 Plate density

UNS N10276 Hastelloy C276 Plate density
lb/in3 : 0.321
g/cm3 :8.89

 

Weight per Unit of AMS 5599 Alloy C276 Hastelloy plate

C276 Hastelloy Sheet Weight & Density

Thickness Alloy Plate Weight per Unit Area Density
3/16 inches Hastelloy C276 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches Hastelloy C276 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches Hastelloy C276 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches Hastelloy C276 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches Hastelloy C276 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches Hastelloy C276 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches Hastelloy C276 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches Hastelloy C276 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches Hastelloy C276 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches Hastelloy C276 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches Hastelloy C276 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches Hastelloy C276 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches Hastelloy C276 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches Hastelloy C276 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches Hastelloy C276 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches Hastelloy C276 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

 

Size chart of C276 Hastelloy plate

Stocked Sizes
Size (in inches)
Size (in mm)
.125"
3.18mm
.134"
3.40mm
.156"
3.96mm
.187"
4.75mm
.250"
6.35mm
.312"
7.92mm
.375"
9.53mm
.500"
12.7mm
.625"
15.9mm
.750"
19.1mm
.875"
22.2mm
1"
25.4mm
1.125"
28.6mm
1.250"
31.8mm
1.500"
38.1mm
1.750"
44.5mm
2"
50.8mm
2.500"
63.5mm
3"
76.2mm

 

Dimensions of Hastelloy C276 Plate

ASTM B575 Alloy C276 Plate Imperial Dimensions

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

ASTM B575 C276 Alloy Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

 

Ready Stock of Alloy Hastelloy C276 Plate

we stock following Types of Hastelloy C276 Plate:

C276 Hastelloy plate UNS N10276 Hastelloy C276 Rolling Plate
ASTM B575 Alloy C276 Chequered Plate Alloy Hastelloy C276 Quarto Plate
UNS N10276 Hastelloy C276 Cold Rolled Plate Alloy Hastelloy C276 Bbq Plate
Alloy Hastelloy C276 Hot Rolled Plate ASTM B575 Alloy C276 Perforated Plate
Alloy Hastelloy C276 Plate Mill Finish Hastelloy C276 Din 2.4819 Thin Plate
ASTM B575 Alloy C276 Plate 2b Finish Alloy C276 Nickel Diamond Plate
Hastelloy C276 Din 2.4819 Chequer Plate UNS N10276 Alloy C276 Tread Plate
Alloy C276 Nickel Clad Plate Hastelloy C276 Alloy Tisco Plate
Hastelloy C276 Alloy Checker Plate 2.4819 Alloy C276 Polished Plate
UNS N10276 Alloy C276 Plate Mirror Finish Hastelloy C276 Grade Chequered Plate
2.4819 Alloy C276 Plate Brushed Finish Hastelloy C276 Superalloy Hot Rolled Sheet
Hastelloy C276 Grade 10mm Plate Hastelloy Alloy C276 Cold Rolled Sheet
Hastelloy Alloy C276 Custom Cut Plate Hastelloy C276 Nickel Alloy Sheet
Hastelloy C276 Superalloy 1/4 Inch Plate 2.4819 Hastelloy C276 Perforated Sheet
Hastelloy C276 Nickel Alloy Embossed Plate C276 Hastelloy Plasma Cutting Plate
2.4819 Hastelloy C276 Checkered Plate ASTM B575 Alloy C276 Laser Cut Plate

 

Hastelloy C276 Hot rolled Plate & Hastelloy C276 Cold rolled Plate, Sheet Stock List

Alloy Product form Dimension
ALLOY C-276 (Ni/15Cr/16Mo/4W) Sheet; cold rolled, solution annealed 0.4x914.4 mm x coil, Weight=3.10 kg/m
INCONEL C-276 (Ni/15Cr/16Mo/4W) Sheet; cold rolled, solution annealed 0.5x1000 mm x coil, 4.4 kg/m
INCONEL C-276 (Ni/15Cr/16Mo/4W) Sheet; cold rolled, solution annealed 0.7x1219 mm x coil, 7.7 kg/m
INCONEL C-276 (Ni/15Cr/16Mo/4W) Sheet; cold rolled 0.965x1219x3657 mm, 38.25 kg/pc
INCONEL C-276 (Ni/15Cr/16 Mo/4W) Sheet; cold rolled, solution annealed 1.0x1219 mm x coil, 10.8 kg/m
INCONEL C-276 (Ni/15Cr/16Mo/4W) Sheet; cold rolled, solution annealed 1.5x1220x3000 mm, 48.5 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W) Sheet; cold rolled, solution annealed 1.6x1220x3000 mm, 52.0 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W) Sheet; cold rolled, solution annealed 2.0x1220x3000 mm, 63.0 kg/pc
ALLOY C-276 (Ni/15Cr/16Mo/4W) Sheet; cold rolled, solution annealed, pickled 3.0x1220x3000 mm, 99.0 kg/pc
ALLOY C-276 (Ni/15Cr/16Mo/4W) Sheet; CR, Pkl, solution annealed, 4.0x1200x3000 mm, 134 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W) Plate; hot rolled, descaled, sol annealed, sheared 6.0x2000x6000mm, 664 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W) Plate; hot rolled, sol annealed, descaled, sheared 8.0x2000x6000 mm, 902 kg/pc
ALLOY C-276 (Ni/15Cr/16Mo/4W) Plate; hot rolled 12.0x1000x1000 mm, 107 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W) Plate; hot rolled 25.0x1200x3000mm, 198 kg/pc


Equivalent Grades of Hastelloy C276 Plate

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C276 2.4819 N10276 NW 0276 ХН65МВУ NiMo16Cr15W ЭП760


UNS N10276 Hastelloy C276 Plate Properties

Chemical Composition of ASTM B575 Alloy C276 Plate

Grade C Mn Si S Co Ni Cr Fe Mo P
C276 0.010 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.00 – 17.00 0.04 max

 

ASTM B575 Alloy C276 Plate Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C276 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %

Material Ultimate Tensile (min) Yield Strength (Min) Elongation % Hardness Rb
Ksi Mpa Ksi Mpa
C276 Plate 107.4 741 50.3 347 67 89
C276 Sheet 115.5 796 54.6 376 60 86

 

Difference Between Hastelloy and Inconel

Hastelloy

Hastelloy® could be a trademark for a series of high-strength, nickel based, corrosion resistant alloys created by Haynes Worldwide.

Hastelloy Melting Point, Density and Tensile Strength

  Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %
C276 8.89 g/cm33 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40%
B2 9.2 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 40%
B3 9.2 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 40%
C4 8.64 g/cm3 1350-1400 °C 783 365 55%
Hybrid BC1 8.83 g/cm³ 1343 - 1443°C 725 310 40%
X 8.22 g/cm³ 1355°C 655 MPa 240 MPa 35%

 

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Inconel Melting Point, Density and Tensile Strength

  Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
600 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %
601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %
617 8.3g/cm³ 1363°C ≥ 485 MPa ≥ 275 MPa 25 %
625 8.4 g/cm3 1350 °C (2460 °F) Psi – 135,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %
690 8.3g/cm³ 1363°C ≥ 485 MPa ≥ 275 MPa 25 %
718 8.2 g/cm3 1350 °C (2460 °F) Psi – 135,000 , MPa – 930 Psi – 70,000 , MPa – 482 45 %
725 8.31 g/cm3 1271°C-1343 °C 1137 MPa 827 MPa 20 %
X-750 8.28 g/cm3 1430°C 1267 MPa 868 MPa 25 %

 

Alloy C276 Plate Features

  • Low carbon content which minimizes grain-boundary carbide precipitation during welding to maintain resistance to corrosion in heat-affected zones of welded joints
  • Exceptional resistance to strong solutions of oxidizing salts, such as ferric and cupric chlorides
  • Excellent corrosion resistance in reducing environments
  • High nickel and molybdenum contents providing good corrosion resistance in reducing environments
  • One of few materials to withstand the corrosive effects of wet chlorine gas, hypochlorite and chlorine dioxide
  • Resistance to localized corrosion such as pitting and stress-corrosion cracking

 

Hastelloy C276 plate uses

  • Organic chloride process equipment.
  • Evaporators, heat exchangers, filters and mixers used in sulfuric acid environments.
  • Equipment for flue-gas desulfurisation plants.
  • Equipment for processes utilizing halide or acid catalysts.
  • Digesters and bleach plants in the paper industry.
  • Sulfuric acid reactors.
  • Components exposed to sour gas.

 

Difference between Hastelloy C276 Plate, Sheet, & Foil

  • Thickness greater than 6.35 mm is called a Hastelloy C276 Plate.
  • Thickness greater than 0.15 mm and less than 6.35mm is called a Hastelloy C276 Sheet.
  • Thickness less than 0.15mm is called a Hastelloy C276 Foil.

 

1200 happy customers of Hastelloy C276 plate in following States

Gujarat
Tamil Nadu
Kerala
Jharkhand
Andhra Pradesh
Karnataka
Delhi
West Bengal
Noida
Uttar Pradesh
Bihar
Maharashtra

 

Successfully projects completed of Hastelloy C276 Sheet in following countries

United Arab Emirates
Bahrain
Iraq
Kuwait
Oman
Qatar
Saudi Arabia(KSA)

 

One of India’s largest supplier of Hastelloy C-276 UNS N10276 Cold Rolled Plate, stockholder of JIS NW C276 Plate, Hastelloy C276 N10276 Slitting Coil in India, wholesaler of Hastelloy C276 Grade Shim Stock in Mumbai, manufacturers of Nickel Alloy C276 Clad Plate
Get a Quote from Hastelloy UNS N10276 Polished Cold Drawn Plate suppliers, dealer of 2.4819 Alloy C276 Flat Plate stockist of Hastelloy C276 ASTM B575 Polish Plate, Hastelloy C276 Circle, traders of Haynes Alloy C276 N10276 Polished Plate