Monel 400 round bar

  • Home
  • Monel 400 round bar suppliers

Ask free sample from monel 400 rod, monel 400 round bar suppliers, UNS N04400 Monel 400 Hex Bar manufacturer of in India, Werkstoff 2.4360 Monel Round Bar suppliers.

Most reliable supplier of monel round bar, 2.4360 Monel 400 Flat Bar, Stockist of ASTM B164 Monel 400 Alloy Triangular Bar, nickel alloy 400 rod, Monel 4400 Bar Stock in Mumbai, India. check Monel UNS N04400 Square Bar Price in India, Manufacturer of Monel 400 Steel Bright Bars

Nickel copper based Alloy 400 Monel 2.4360 Cold Drawn Bar is virtually immune to chloride ion stress related corrosion cracking, when exposed to corrosive media in typical environments.



Monel 400 round bar
Monel 400 round bar
monel alloy 400 rod
monel alloy 400 rod
UNS N04400 Hex Bar
UNS N04400 Hex Bar

 

Table Of Content

A full range of Monel 2.4360 Hollow Bar, manufacturers of Monel Grade 400 Forged Bar, supplier of ASTM B164 Monel® 400 Hex Bar, importer of Monel UNS N04400 Polished Bar, Monel 400 Nickel Hexagon Bars in India, Check ASTM B164 Alloy 400 Bar Price List

Another important point to note is that this nickel alloyed Monel UNS N04400 Square Bar is attacked in environments which contain sulfur bearing gases at a temperature range that falls above approximately 700° F. Similarly, molten sulfur attacks the Monel UNS No4400 rectangular bar in environments where the temperature can exceed above 500° F approximately.

Although Monel 400 Grade Cold Finished Bar offers about the same or similar resistance to corrosion as nickel but monel 400 round bar suppliers prefer this alloy due to the Monel 400 Nickel Hexagon Bars having a much higher maximum working pressure and temperatures, that too at a lower cost, which can be attributed to its superior ability to be machined.

Monel N04400 Hot Rolled Bar can easily be welded by any one of the following methods i.e. - gas-tungsten arc method, gas metal arc process or shielded metal arc technique. Welding processes conducted on the Monel UNS 4400 Spring Steel Bar can be performed by using appropriate filler metals. There is no need for manufacturers to conduct a post weld heat treatment on the Monel Grade 400 Forged Bar. However, thoroughly cleaning the ASTM B164 Alloy 400 Bar is a mandate after welding operations, because it is critical for optimum corrosion resistance. Not cleaning the nickel alloy 400 round bar can otherwise increase the risk of contamination and embrittlement in the metal.

compare monel 400 round bar price with Monel K500 round bar price

 

Monel 400 round bar Specification

Specifications: ASTM B164, AMS 4730, AMS 4675, AMS 4731
Monel 400 Specifications: ASTM B164, ASME SB164, UNS N04401
International Specifications: DIN 17753, QQ-N-281, BS3076NA13, VdTUV 263

  • UNS N04400
  • ASTM B164
  • AMS 4675
  • AMS 4730
  • ASM 4731
  • QQ-N-281
  • BS3076NA13
  • DIN 17753
  • VdTUV 263
Grade Monel 400 - UNS N04400, Nickel Alloy 400 (66 Ni/34 Cu)
Specification ASTM B164 UNS N04400
Standard ASTM, ASME, API, GB, AISI, DIN, EN, SUS, UNS
Alloy 400 Round bar size Diameter: 3-~800mm
400 Monel Hex Bar size 2-100mm A/F
Monel Alloy 400 Flat bar size Thickness: 2 -100mm
Width: 10 to 500mm
400 Monel Alloy Square bar size 4 to 100mm
Monel 400 Angle bar size (in mm) 3*20*20~12*100*100
ASTM B164 Monel 400 Section 3.0 to 12.0mm thickness
Monel WERKSTOFF NR. 2.4360 Channel Bar (in mm) 80 x 40 to 150 x 75 section; 5.0 to 6.0 thickness
Nickel Alloy 400 Hollow Bar (in mm) 32 OD x 16 ID to 250 OD x 200 ID)
2.4360 Monel 400 Billet Size 1/2" to 495mm Diameter
ASTM B164 400 Monel Rectangles Size 33 x 30mm to 295 x 1066mm
400 Monel Round Bar Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Alloy Monel 400 Round Bar Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Monel 400 round bar Condition Hardened & tempered, annealed
400 Monel Bar Technique Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Monel 400 Din 2.4360 Round Bar Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
UNS N04400 Monel Bar Processing Bar cutting to 650mm
Our Monel 400 round bar stockyad in India Agra, Gujarat, Bhubaneswar, Chennai, Bengaluru, Dhanbad, Mumbai, Noida, Thiruvananthapuram, Coimbatore, Shivamogga, Ahmedabad, Hyderabad, Pune, Tiruchirappalli, Tirunelveli, Navi Mumbai, Pimpri-Chinchwad,
Our Monel Alloy 400 Round bar conforms to NACE MR0175/ISO 15156

 

Monel® alloy 400 Rod,
Diameter:3.0mm, Temper: Annealed
Monel® alloy 400 Rod,
Diameter:6.35mm, Temper: As drawn
Monel® alloy 400 Rod,
Diameter:12.7mm, Temper: As drawn
Monel® alloy 400 Rod,
Diameter:20mm, Temper: Annealed
Monel® alloy 400 Rod,
Diameter:40mm, Temper: Annealed

 

What is Monel 400 round bar?

Generally, the corrosion resistance exhibited by Monel 400 ASTM B164 Round Rod tends to be very good in reducing environments, although the monel 400 round bar suppliers in Mumbai note that the alloy tends to perform poorly in oxidizing conditions. That being said, Werkstoff 2.4360 Monel Round Bar is not very useful in the presence of oxidizing acids, such as nitric acid and nitrous acid. Nevertheless, the Monel 400 Round Bar is resistant to most alkalis, salts, waters, food products, along with being resistant to organic substances and atmospheric conditions at normal as well as at elevated temperature settings.

 

Monel UNS N04400 Round Bar Price in India

Price list of Monel 400 round bar in India Monel UNS N04400 Bar Price in India (INR) Alloy 400 Rod Price in UK Pound sterling Monel UNS N04400 Round Bar Price in UAE Dirham

Monel 400 Round Bar Dia : 200 X 210 Mm

INR 159,149 1721.85 UK Pound sterling 8246.91 UAE Dirham

This is an approximate Cost of Alloy 400 Round Bar Stock in India. For factory price buy directly from hot or cold finished Monel 400 round bar manufacturers in India, check latest Monel UNS N04400 Round Bar price list & stock sizes please mail us.

 

Types of Monel 400 round bar

Monel Alloy 400 Rod
Monel Alloy 400 Rod
Alloy 400 Hex Bar
Alloy 400 Hex Bar
Monel UNS N04400 Round Bar
Monel UNS N04400 Round Bar
400 Monel Flat Bar
400 Monel Flat Bar
Monel 400 Bar Material
Monel 400 Bar Material
400 Monel Alloy Rounds
400 Monel Alloy Rounds
Monel WERKSTOFF NR. 2.4360 Square Bar
Monel WERKSTOFF NR. 2.4360 Square Bar
ASTM B164 Monel 400 Annealed Bar
ASTM B164 Monel 400 Annealed Bar
2.4360 Monel 400 Polished Bar
2.4360 Monel 400 Polished Bar
Nickel Alloy 400 Bright Bar
Nickel Alloy 400 Bright Bar
Monel 400 Din 2.4360 Round Bar Cold Drawn
Monel 400 Din 2.4360 Round Bar Cold Drawn
ASTM B164 400 Monel Black Bar
ASTM B164 400 Monel Black Bar
400 Alloy Round Bar Hot Rolled
400 Alloy Round Bar Hot Rolled
Alloy Monel 400 Flat Bar Hot Rolled
Alloy Monel 400 Flat Bar Hot Rolled
UNS N04400 Monel Flat Bar Cold Drawn
UNS N04400 Monel Flat Bar Cold Drawn
400 Monel Square Bar Hot Rolled
400 Monel Square Bar Hot Rolled

 

Other types of Monel 400 round bar stock:

Description Diameter Shape Specification
ALLOY 400 COLD DRAWN SR 1.250 DIA 1.2500 BAR / ROD ROUND WN221
ALLOY 400 HOT FINISHED ANN 1.00 DIA 1.0000 BAR / ROD ROUND ASTM B164 ASME SB164
ALLOY 400 HOT FINISHED ANN 1.500 DIA 1.5000 BAR / ROD ROUND ASTM B164 ASME SB164
ALLOY 400 HOT FINISHED ANN 2.000 DIA 2.0000 BAR / ROD ROUND ASTM B164 ASME SB164
ALLOY 400 HOT FINISHED ANN 3.500 DIA 3.5000 BAR / ROD ROUND ASTM B164 ASME SB164
ALLOY 400 HOT FINISHED ANN .750 DIA 0.7500 BAR / ROD ROUND ASTM B164 ASME SB164
ALLOY 400 HOT FINISHED ROD ANN 1.750 DIA 1.7500 BAR / ROD ROUND ASTM B164 ASME SB164

 

Monel 400 UNS N04400 Square Bar Cold Drawn ASTM B164 Monel 400 Alloy Bright Bar material
2.4360 Monel 400 Rod Monel 400 Flat Bar Annealed
Monel 2.4360 Round Bars ASTM B164 Monel 400 Alloy Flat Bar stock
UNS 4400 Monel Forged Bar Monel 400 ASTM B164 Polished Bar
ASTM B164 Alloy 400 Bright Bar Monel UNS N04400 Flat Bar Polished
Monel 400 Steel Hex Bar Annealed Alloy 400 Monel 2.4360 Cold Drawn Round Bar
ASTM B164 Monel 400 Alloy Square Bar Polished Monel 400 Bright Bar Hot Rolled
Alloy 400 Monel 2.4360 Hex Bar Monel 400 UNS N04400 Threaded Bar
ASTM B164 Monel 400 Alloy Bar Monel 400 Steel Flat Bar Black
Monel 400 Round Bar Werkstoff 2.4360 Monel Flat Bar
Monel ASTM B164 Rectangular Bar Alloy 400 Monel 2.4360 Threaded Bar Black
Monel Grade 400 Rods Monel 400 Grade Flat Bar Cold Drawn
Monel 400 ASTM B164 Rectangular Bar Annealed Monel 400 Steel Polished Hex Bar
Monel ASTM B164 Hex Bar Polished 2.4360 Monel 400 Hexagonal Bar
Monel 400 UNS N04400 Rounds UNS 4400 Monel Flat Bar Bright
UNS N04400 Monel 400 Hex Bar Bright Monel Grade 400 Hollow Bar

 

400 Monel Alloy Round Bar Condition

H&T Hardened and tempered.
ANN Annealed
PH Precipitation hardened.

 

Monel 400 round bar suppliers

We can produce Monel 400 round bar in following forms & shapes:

  • Rod
  • Flat Bars
  • Round
  • Square
  • Channel Bars
  • T-Bars
  • Blocks
  • Precision Ground Bars
  • Rings
  • Hollow
  • Round Rod
  • Rectangular Bar
  • Triangle
  • Hex (A/F)
  • Rectangle
  • Half Round Bars
  • Threaded
  • Billet
  • Profiles
  • I/H Bars
  • Forging
  • Ingot

 

AMS 4730, AMS 4675, AMS 4731 Monel Alloy 400 Rod, Bar Stock List

Alloy Product form Dimension
MONEL ALLOY 400 (66 Ni/34 Cu) Square rod; cold drawn 25x25 mm, Weight=5.7 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; solution annealed, ground, polished Dia=6.35 mm, Weight=0.27 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; cold drawn, annealed Dia=8.0 mm, Weight=0.43 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; drawn, ground Dia=10.0 mm, Weight=0.7 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; cold drawn, annealed Dia=12.0 mm, Weight=1.1 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; annealed, peeled Dia=16.0 mm, Weight=1.9 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; hot finished, ground, annealed Dia=20.0 mm, Weight=2.9 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; cold drawn, stress relieved Dia=25.0 mm, Weight=4.5 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; hot worked, annealed, peeled Dia=30.0 mm, Weight=6.4 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; hot worked, annealed, peeled Dia=35.0 mm, Weight=8.7 kg/m
MONEL ALLOY 400 (66 Ni/34 Cu) Round rod; extruded, machined, annealed Dia=40.0 mm, Weight=11.0 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; hot worked, annealed, peeled Dia=45.0 mm, Weight=14.0 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; hot worked, peeled, annealed Dia=50.0 mm, Weight=17.6 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; hot worked, peeled, annealed Dia=60.0 mm, Weight=25.6 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; hot finished, annealed, peeled Dia=65.0 mm, Weight=30.0 kg/m
MONEL ALLOY 400 (66 Ni/34 Cu) Round rod; forged, peeled, annealed Dia=75.0 mm, Weight=40.0 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; forged, peeled, annealed Dia=80.0 mm, Weight=44.0 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; forged, annealed, peeled Dia=85.0 mm, Weight=49.0 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; hot worked, peeled, annealed Dia=100.0 mm, Weight=71.0 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; forged, peeled, annealed Dia=115.0 mm, Weight=92.0 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; hot worked, annealed, peeled Dia=127.0 mm, Weight=109 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; hot finished, annealed, peeled Dia=130.0 mm, Weight=118 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; hot finished, annealed, peeled Dia=140.0 mm, Weight=133 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; annealed, peeled Dia=150.0 mm, Weight=153 kg/m
MONEL ALLOY 400 (64Ni/34 Cu) Round rod; forged, peeled, annealed Dia=165.0 mm, Weight=190 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; annealed, forged Dia=170.0 mm, Weight=196 kg/m
ALLOY 400 (66 Ni/34 Cu) Round rod; hot finished, annealed, peeled Dia=200.0 mm, Weight=271 kg/m
MONEL ALLOY 400 (66 Ni/34 Cu) Hexagon rod 48.0 mm a/f, Weight=17.18 kg/m


Alloy 400 Round Bar Sizes

The sizes of Monel UNS N04400 Bars can also be selected when using the THD model.

Size & Dimensions of Monel 400 round bar
Metric US Bar ASTM/ Canadian Japanese
Bar Size Diam. (mm) Bar Size Diam. (Inch) Bar Size Diam. (mm2) Bar Size Diam. (mm)
5 5 #2 0.250 10M 100 6 6
5.5 5.5 #3 0.375 15M 200 10 10
6 6 #4 0.500 20M 300 13 13
7 7 #5 0.600 25M 500 16 16
8 8 #6 0.750 30M 700 19 19
9 9 #7 0.875 35M 1000 22 22
10 10 #8 1.000 45M 1500 25 25
11 11 #9 1.125 55M 2500 29 29
12 12 #10 1.250 32 32
14 14 #11 1.375 35 35
16 16 #12 1.500 38 38
18 18 #13 1.600 41 41
20 20 #14 1.750 44 44
22 22 #15 1.875 48 48
25 25 #16 2.000 51 51
28 28 #18 2.250 57 57
32 32
36 36
40 40
44 44
50 50

Prestige quality Monel 400 round bar suppliers offer variety of shapes such as Round Bar, Square Bar, Hexagonal Bar, Flat Bar, Channels & Hollow Bar.

Type SIZES (mm) SIZES (Inches) ISO Tolerance
Monel UNS N04400 Cold Drawn and Polish Round Bar 3.00 – 75.00 1/8" – 3.00" h8-h9-h10-h11
Alloy 400 Cold Drawn and Ground Bar 10.00 – 75.00 5/6" – 2.50" h8-h9-h10-h11
400 Monel Peeled and Polished Round Bar 40.00 – 150.00 1.50" – 6.00" h11, h11-DIN 1013
Monel Alloy 400 Peeled and Ground Bar 20.00 – 50.00 3/4″ – 2.00" h9-h10-h11

Monel UNS N04400 Bars Standard lengths of 2000 mm up to 6000 mm. Cut to size on request (tolerance +2/-0 mm).

 

Monel 400 Round Bar Weights

Monel 400 Round Bar Weight Chart

Round Bar
Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr
3mm 0.017 0.055 20mm 0.753 2.470 3" 10.900 35.762
1/8" 0.019 0.062 22mm 0.908 2.979 3-1/4" 12.800 41.996
5/32" 0.029 0.095 7/8" 0.926 3.038 3-1/2" 14.850 48.772
4mm 0.030 0.098 24mm 1.080 3.543 3-3/4" 17.001 55.780
3/16" 0.043 0.141 25mm 1.180 3.871 4" 19.306 63.340
5mm 0.047 0.154 1" 1.210 3.970 4-1/4" 21.908 72.249
7/32" 0.058 0.190 26mm 1.271 4.170 4-1/2" 24.4487 80.340
6mm 0.068 0.223 27mm 1.368 4.490 4-3/4" 27.366 90.249
1/4" 0.076 0.249 1-1/8" 1.534 5.033 5" 30.461 99.940
7mm 0.091 0.298 30mm 1.691 5.548 5-1/2" 36.690 121.000
5/16" 0.118 0.387 1-1/4" 1.924 6.349 6" 43.860 143.900
8mm 0.120 0.398 32mm 1.894 6.314 6-1/2" 51.093 167.630
9mm 0.152 0.498 1-3/8" 2.303 7.550 7" 59.432 196.000
3/8" 0.170 0.557 35mm 2.390 7.553 7-1/2" 68.226 225.000
10mm 0.189 0.620 36mm 2.438 7.999 8" 77.586 254.55
11mm 0.228 0.748 38mm 2.792 8.903 10" 121.048 397.140
7/16" 0.232 0.761 1-1/2" 2.715 8.951
12mm 0.271 0.889 40mm 3.009 9.872
1/2" 0.303 0.994 1-5/8" 3.200 10.449
13mm 0.318 1.043 1-3/4" 3.712 12.179
14mm 0.368 1.207 45mm 3.807 12.555
9/16" 0.383 1.256 1-7/8" 4.260 13.977
15mm 0.424 1.391 48mm 4.330 14.205
5/8" 0.473 1.551 50mm 4.698 15.414
16mm 0.481 1.578 2" 4.848 15.906
17mm 0.543 1.791 2-1/8" 5.475 17.963
11/16" 0.573 1.880 2-1/4" 6.135 20.128
18mm 0.610 2.001 60mm 6.768 22.205
3/4" 0.682 2.237 2-3/8" 6.838 22.435
2-1/2" 7.576 24.856
2-5/8" 8.354 27.409
2-3/4" 9.169 30.083

 

400 Monel Round Bar Length

  • Metric system: standard length is 9 - 12 metres
  • USA : 40 feet

 

Monel Alloy 400 Round Bar Tolerances

Cold Drawn 400 Monel Alloy Round Bar Tolerance & Steel Hexagon, Flat Tolerance (BS 970-3)

Tolerances for Cold Drawn Monel 400 Round Bar
Shape / Section Size, diameter or width across flats Permitted variation
mm mm
Round ≥6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
+ 0 to - 0.070
+ 0 to - 0.085
+ 0 to - 0.100
+ 0 to - 0.120
+ 0 to - 0.140
Flat (thickness) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.250
+ 0 to - 0.350
Flat (width) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
> 100 ≦ 130
> 130 ≦ 160
> 160 ≦ 320
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.160
+ 0 to - 0.190
+ 0 to - 0.220
+ 0 to - 0.350
+ 0 to - 1.00
+ 1.00 to - 1.00
Square and
hexagon
≥ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 105
+ 0 to - 0.090
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.160
+ 0 to - 0.250

 

Tolerances of Turned ASTM B164 Monel 400 Round Bar (BS 970-3)

Turned Monel 400 round bar Tolerances
Monel 400 round bar Size, diameter Permitted variation
mm mm
≧ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 120
> 120 ≦ 180
> 180 ≦ 250
> 250 ≦ 315
> 315 ≦ 400
> 400
+ 0 to - 0.070
+ 0 to - 0.085
+ 0 to - 0.100
+ 0 to - 0.120
+ 0 to - 0.140
+ 0 to - 0.160
+ 0 to - 0.185
+ 0 to - 0.210
+ 0 to - 0.230
+ 0 to - 0.250

 

Tolerances of Precision Monel WERKSTOFF NR. 2.4360 Round Bar (BS 970-3)

Precision Nickel Alloy 400 Round Bar Tolerances
Section Size,
diameter
Permitted overall variation
Class A Class B Class C
mm mm mm mm
Round ≧ 6 <75 0.05 0.025 0.013

 

Tolerance of Monel UNS N04400 Bright Round Bar (BS EN ISO 286-2 )

Monel 400 round bar Tolerance ISO “H” Series in MM
NOMINAL SIZE h5 h6 h7 h8 h9 H10 H11 h12
DIAMETER mm
~ to 3 +0.004/0 +0.006/0 +0.01/0 +0.014/0 +0.025/0 +0.04/0 +0.06/0 +0.1/0
over 3 to 6 +0.005/0 +0.008/0 +0.012/0 +0.018/0 +0.03/0 +0.048/0 +0.075/0 +0.12/0
over 6 to 10 +0.006/0 +0.009/0 +0.015/0 +0.022/0 +0.036/0 +0.058/0 +0.09/0 +0.15/0
over 10 to 18 +0.008/0 +0.011/0 +0.018/0 +0.027/0 +0.043/0 +0.07/0 +0.11/0 +0.18/0
over 18 to 30 +0.009/0 +0.013/0 +0.021/0 +0.033/0 +0.052/0 +0.084/0 +0.13/0 +0.21/0
over 30 to 50 +0.011/0 +0.016/0 +0.025/0 +0.039/0 +0.062/0 +0.1/0 +0.16/0 +0.25/0
over 50 to 80 +0.013/0 +0.019/0 +0.03/0 +0.046/0 +0.074/0 +0.12/0 +0.19/0 +0.3/0
over 80 to 120 +0.015/0 +0.022/0 +0.035/0 +0.054/0 +0.087/0 +0.14/0 +0.22/0 +0.35/0
over 120 to 180 +0.018/0 +0.025/0 +0.04/0 +0.063/0 +0.1/0 +0.16/0 +0.25/0 +0.4/0
over 180 to 250 +0.02/0 +0.029/0 +0.046/0 +0.072/0 +0.115/0 +0.185/0 +0.29/0 +0.46/0

 

400 Monel Alloy Round Bar finishes

Monel 400 Round Bar Surface finish

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

 

Monel 400 round bar Material Properties

Specific Gravity
8.8 g/cm3
Typical Applications Related Specifications
  • Specialty Chemicals
  • Pharmaceutical Equipment
  • Pulp & Paper Industry
  • Sea Water Equipment
  • Heat Exchangers
  • Off-Shore Oil Drilling Companies
  • Gas Processing
  • UNS N04400
  • ASTM B164
  • AMS 4675
  • AMS 4730
  • ASM 4731
  • QQ-N-281
  • BS3076NA13
  • DIN 17753
  • VdTUV 263

 

Monel UNS N04400 Round Bar Chemical Composition

Grade Ni Fe C Mn Si Cu Al S
Monel 400 63.0 min 1.0 – 2.5 0.3 max 2.0 max 0.5 max 28.0 – 34.0 0.50 max 0.02 max

 

Mechanical Properties of Monel UNS N04400 Bar

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 35000 , MPa – 240 40 %

 

Monel 400 round bar Equivalent

STANDARD WERKSTOFF NR. UNS GOST AFNOR JIS BS EN
Monel 400 2.4360 N04400 МНЖМц 28-2,5-1,5 NU-30M NW 4400 NA 13 NiCu30Fe

 

Monel UNS N04400 Round Bar Uses

There are many sectors and industries consuming ASTM B164 Monel 400 Round Bar like:

Railway engines and coaches 400 Monel Round Bar to making arms and ammunition
Monel 400 Round Bar to manufacturing conveyor shafts 400 Monel Alloy Round Bar to produce Cold headed components
Monel UNS N04400 bright bar used for Automobile Industries to make nuts, bolts, shafts Monel UNS N04400 Rod are also used in Agricultural sector
Monel Alloy 400 Round Bar for manufacturing gears, bearings, and hinges Alloy 400 bright bar used for Electric pumps / motors
Textile industry Heavy engineering Industries

 

Monel 400 Round Bar for Sale

Monel 400 Grade Square Bar Black Monel UNS N04400 Black Bar
Werkstoff 2.4360 Monel Hex Bar Cold Drawn Monel 2.4360 Triangular Bar
UNS N04400 Monel 400 Rectangular Bar stock UNS 4400 Monel Polished Bar Stock
Monel 400 Square Bar Bright Monel 400 Grade Bright Bar Cold Drawn
ASTM B164 Alloy 400 Square Bar Annealed Monel 400 UNS N04400 Bright Bar Flat
Monel 2.4360 Threaded Bar M16 Monel 400 Threaded Rods
Alloy 400 Monel 2.4360 Rectangular Bar Cold Drawn Werkstoff 2.4360 Monel Polished Square Bar
Monel 2.4360 Rectangular Bar Polished Monel ASTM B164 Polished Round Bar
2.4360 Monel 400 Threaded Bar M12 Monel 400 ASTM B164 Threaded Bar Stock
Monel UNS N04400 Square Bar UNS N04400 Monel 400 Polished Flat Bar
2.4360 Monel 400 Rectangular Bar Bright Monel Grade 400 Bright Bar Hollow
Monel Grade 400 Rectangular Bar Black ASTM B164 Alloy 400 Bright Bar Hex
Monel 400 ASTM B164 Hex Bar Black ASTM B164 Alloy 400 Square Rod

 

Our best supply locations of Monel 400 round bar in following States

Maharashtra
Jharkhand
Tamil Nadu
West Bengal
Kerala
Noida
Karnataka
Andhra Pradesh
Uttar Pradesh
Delhi
Bihar
Gujarat

 

Quick delivery for 400 Monel Rod in following countries

Saudi Arabia(KSA)
Oman
United Arab Emirates
Iraq
Bahrain
Qatar
Kuwait

 

one of the top nickel alloy 400 round bar suppliers, wholesaler of Monel 400 ASTM B164 Round Rod in Mumbai, manufacturers of Monel ASTM B164 Forged Round Bars, stockholder of 400 Alloy Black Bar, Alloy 400 Monel 2.4360 Cold Drawn Bar, 400 Monel Alloy Forged Bar in India.
Order monel 400 bar stock custom sizes online, dealer of Monel UNS No4400 rectangular bar, Monel UNS 4400 Spring Steel Bar traders of monel rod, Monel Alloy 400 Rod, stockist of Monel N04400 Hot Rolled Bar and Monel 400 Grade Cold Finished Bar