Nickel 200 round bar

  • Home
  • Nickel 200 round bar suppliers

Ready Stock of Nickel 200 rod, nickel 200 bar, suppliers of 200 Nickel Alloy Hex Bar nickel 200 welding rod, UNS N02200 Nickel 200 Flat Bar manufacturers in India

Bright finish N02200 Nickel Alloy Bar, Stockist of UNS N02200 Pure Nickel Round Bar in Mumbai, India, Manufacturer of 2.4066 Nickel 200 Rod, Alloy 200 Flat Bar, check Nickel 200 ASTM B160 Hex Bar, Nickel Alloy 200 Round Bar Price in India

Nickel 200 Round Bar can be found in hardened and tempered form. It is a commercially unalloyed nickel that has excellent corrosion resistance and has a very low electrical resistivity.It also possesses other features like weldability, formability and high tensile strength.

Nickel 200 round bar
Nickel 200 round bar
nickel 200 welding rod
nickel 200 welding rod
astm b 160 uns n02200 Hex Bar
astm b 160 uns n02200 Hex Bar

 

Table Of Content

buy Nickel ASTM B160 Hollow Bar, Special price for Nickel Alloy Ni-200 Cold Drawn Bar, manufacturers of Nickel UNS N02200 Forged Round Bars, Check ASTM B160 Nickel 200 Hexagonal Bar Price List, importer of Nickel 200 UNS N02200 Round Rod in India

There are a lot of suppliers who sell products at a lesser price but it’s the quality that matters. The Nickel 200 Bar we supply is produced with excellent quality material and at the best price available. You can replace Nickel 200 Rod of various shapes and sizes. Choose, the best fit for you as there are a lot of options available

The Nickel Alloy UNS No 2200 Hot Rolled Bar has good resistance to corrosion in acids and alkalis. This is especially considered to be the most useful property by nickel 200 round bar suppliers in Mumbai in times when the alloy has been exposed to reducing conditions. Another property which makes the Nickel 200 UNS N02200 Round Rod stand out is its outstanding resistance to caustic alkalis up to and including its resistance in a molten state.

In acid, alkaline and neutral salt solutions the Nickel Alloy Ni-200 Cold Drawn Bar shows good resistance. However, in the presence of  oxidizing salt solutions, there will be an occurrence of severe attack seen on the UNS N02200 Pure Nickel Round Bar . Nickel ASTM B160 Hollow Bar has the ability to resist all dry gases at room temperature settings. In fact, the UNS N02200 Nickel 200 Flat Bar is also able to resist dry chlorine as well as hydrogen chloride. Therefore, the Nickel 200 ASTM B160 Hex Bar could be used in environments, where the temperature could rise up to 550C. Resistance to mineral acids for the 2.4066 Nickel 200 Rod varies according to temperature, concentration and if the solution is aerated or not. nickel 200 round bar suppliers note that the materials resistance to corrosion is better when the acid has been de-aerated.

The application for nickel 200 round bar is normally restricted to service at temperatures below 600° F. This is because at higher temperatures No 2200 Nickel Round Bar Stock products can suffer from graphitization. Graphitization is a change that occurs in the microstructure of carbon or low-alloy steel grades such as Nickel 2200 Polished Bar. When exposed to a temperature range between 425°C  to 550°C for an extended or prolonged period of time, nickel based alloys, in this instance - Alloy 200 Cold Finished Bar can result in severely compromised properties.

In times, when the operating temperatures or certain applications are expected to exceed a temperature beyond 600° F, the content of carbon in Ni Alloy 200 Forged Bar becomes critical. The lower carbon content present in Ni 200 Alloy Square Bar makes the material resistant to graphitization. This in turn makes the Nickel 200 Alloy Bright Bars less subject to embrittlement

 

Nickel UNS N02200 Round Bar Price in India

Price list of Nickel 200 round bar in India Nickel UNS N02200 Bar Price in India (INR) Alloy 200 Rod Price in UK Pound sterling Nickel UNS N02200 Round Bar Price in UAE Dirham
UNS N02200 NICKEL ALLOY ROUND BAR (NI 200) ASTM B160-05 INR 1,221/kg 13.19 UK Pound sterling 63.11 UAE Dirham

This is an approximate Cost of Alloy 200 Round Bar Stock in India. For factory price buy directly from hot or cold finished Nickel 200 round bar manufacturers in India, check latest Nickel UNS N02200 Round Bar price list & stock sizes please mail us.

 

Nickel 200 round bar Specification

Grade Nickel 200 - UNS N02200, Nickel Alloy 200
Specification ASTM B 160/ ASME SB 160, DIN 17752, ISO 9723
Standard ASTM, ASME, API, GB, AISI, DIN, EN, SUS, UNS
Alloy 200 Round bar size Diameter: 3-~800mm
200 Nickel Hex Bar size 2-100mm A/F
Nickel Alloy 200 Flat bar size Thickness: 2 -100mm
Width: 10 to 500mm
200 Nickel Alloy Square bar size 4 to 100mm
Nickel 200 Angle bar size (in mm) 3*20*20~12*100*100
ASTM B160 Nickel 200 Section 3.0 to 12.0mm thickness
Nickel WERKSTOFF NR. 2.4066 Channel Bar (in mm) 80 x 40 to 150 x 75 section; 5.0 to 6.0 thickness
Nickel Alloy 200 Hollow Bar (in mm) 32 OD x 16 ID to 250 OD x 200 ID)
2.4066 Nickel 200 Billet Size 1/2" to 495mm Diameter
ASTM B160 200 Nickel Rectangles Size 33 x 30mm to 295 x 1066mm
200 Nickel Round Bar Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Alloy Nickel 200 Round Bar Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Nickel 200 round bar Condition Hardened & tempered, annealed
200 Nickel Bar Technique Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Nickel 200 Din 2.4066 Round Bar Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
UNS N02200 Inconel Bar Processing Bar cutting to 650mm
Our Nickel 200 round bar stockyad in India Pune, Agra, Bengaluru, Shivamogga, Tiruchirappalli, Mumbai, Hyderabad, Bhubaneswar, Chennai, Gujarat, Noida, Tirunelveli, Thiruvananthapuram, Dhanbad, Ahmedabad, Coimbatore, Navi Mumbai, Pimpri-Chinchwad,
Our Nickel Alloy 200 Round bar conforms to NACE MR0175/ISO 15156

 

What is Nickel 200 round bar?

The nickel used in Nickel 200 Bar products are 99.96 % pure. The Nickel 200 Rod is used for a number of processing equipments, most importantly to maintain purity of products in handling foods, alkalies and synthetic fibers. Steel Tubes India is one of the most trusted Nickel 200 Round Bar manufacturers in India as we carry the ISO certification with us

 

Types of Nickel 200 round bar

Nickel Alloy 200 Rod
Nickel Alloy 200 Rod
Alloy 200 Hex Bar
Alloy 200 Hex Bar
Nickel UNS N02200 Round Bar
Nickel UNS N02200 Round Bar
200 Nickel Flat Bar
200 Nickel Flat Bar
Nickel 200 Bar Material
Nickel 200 Bar Material
200 Nickel Alloy Rounds
200 Nickel Alloy Rounds
Nickel WERKSTOFF NR. 2.4066 Square Bar
Nickel WERKSTOFF NR. 2.4066 Square Bar
ASTM B160 Nickel 200 Annealed Bar
ASTM B160 Nickel 200 Annealed Bar
2.4066 Nickel 200 Polished Bar
2.4066 Nickel 200 Polished Bar
Nickel Alloy 200 Bright Bar
Nickel Alloy 200 Bright Bar
Nickel 200 Din 2.4066 Round Bar Cold Drawn
Nickel 200 Din 2.4066 Round Bar Cold Drawn
ASTM B160 200 Nickel Black Bar
ASTM B160 200 Nickel Black Bar
200 Alloy Round Bar Hot Rolled
200 Alloy Round Bar Hot Rolled
Alloy Nickel 200 Flat Bar Hot Rolled
Alloy Nickel 200 Flat Bar Hot Rolled
UNS N02200 Inconel Flat Bar Cold Drawn
UNS N02200 Inconel Flat Bar Cold Drawn
200 Nickel Square Bar Hot Rolled
200 Nickel Square Bar Hot Rolled

 

Nickel 200 round bar suppliers

We can produce Nickel 200 round bar in following forms & shapes:

  • Rod
  • Flat Bars
  • Round
  • Square
  • Channel Bars
  • T-Bars
  • Blocks
  • Precision Ground Bars
  • Rings
  • Hollow
  • Round Rod
  • Rectangular Bar
  • Triangle
  • Hex (A/F)
  • Rectangle
  • Half Round Bars
  • Threaded
  • Billet
  • Profiles
  • I/H Bars
  • Forging
  • Ingot

 

200 Nickel Alloy Round Bar finishes

Nickel 200 Round Bar Surface finish

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

 

Other types of Nickel 200 round bar stock:

Alloy 2200 Forged Bar Nickel 200 ASTM B160 Polished Bar
Nickel Alloy Ni-200 Hex Bar Annealed UNS N02200 Nickel 200 Cold Drawn Round Bar
Alloy 200 Bright Bar Nickel UNS N02200 Flat Bar Polished
ASTM B160 Nickel Alloy Rounds Alloy 2200 Flat Bar Bright
ASTM B160 Nickel Alloy Square Bar Cold Drawn 200 Nickel Alloy Bright Bar material
N02200 Nickel Alloy Rods Nickel 200 Alloy Flat Bar Cold Drawn
Nickel Alloy 200 Rod Nickel 200 Flat Bar Annealed
Nickel 200 Round Bar Alloy 200 Flat Bar
200 Nickel Alloy Bar Nickel Alloy Ni-200 Flat Bar Black
Nickel ASTM B160 Hex Bar Bright N02200 Nickel Alloy Hollow Bar
2.4066 Nickel 200 Round Bars 200 Nickel Alloy Flat Bar stock
Nickel 200 UNS N02200 Rectangular Bar UNS N02200 Nickel 200 Threaded Bar Black
UNS N02200 Nickel 200 Hex Bar ASTM B160 Nickel Alloy Threaded Bar
200 Nickel Alloy Square Bar Polished Nickel 200 Bright Bar Hot Rolled
Nickel 200 ASTM B160 Rectangular Bar Annealed Nickel Alloy Ni-200 Polished Hex Bar
Nickel 200 UNS N02200 Hex Bar Polished Nickel Alloy 200 Hexagonal Bar

 

200 Nickel Alloy Round Bar Condition

H&T Hardened and tempered.
ANN Annealed
PH Precipitation hardened.

 

JIS NW 2200 Nickel 200 Round Bar Stock List

Alloy Product form Dimension
Ni Alloy 200 (99.0 Ni min) Rod; cold drawn, annealed, pickled Dia=3.0 mm, Weight=0.06 kg/m
Ni Alloy 200/201 (99.0 Ni min) Rod; cold drawn, annealed Dia=16.0 mm, Weight=1.77 kg/m
Ni Alloy 200/201 (99.0 Ni min) Rod; cold drawn, annealed Dia=20.0 mm, Weight=2.9 kg/m
Ni Alloy 200/201 (99.0 Ni min) Rod; hot finished, annealed, peeled Dia=30.0 mm, Weight=6.2 kg/m
Ni Alloy 200/201 (99.0 Ni min) Rod; hot worked, annealed, peeled Dia=40.0 mm, Weight=11.2 kg/m
Ni Alloy 200/201 (99.0 Ni min) Rod; hot worked, annealed, peeled Dia=125.0 mm, Weight=111 kg/m


Nickel Alloy 200 Round Bar Tolerances

Cold Drawn 200 Nickel Alloy Round Bar Tolerance & Steel Hexagon, Flat Tolerance (BS 970-3)

Tolerances for Cold Drawn Nickel 200 Round Bar
Shape / Section Size, diameter or width across flats Permitted variation
mm mm
Round ≥6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
+ 0 to - 0.070
+ 0 to - 0.085
+ 0 to - 0.100
+ 0 to - 0.120
+ 0 to - 0.140
Flat (thickness) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.250
+ 0 to - 0.350
Flat (width) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
> 100 ≦ 130
> 130 ≦ 160
> 160 ≦ 320
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.160
+ 0 to - 0.190
+ 0 to - 0.220
+ 0 to - 0.350
+ 0 to - 1.00
+ 1.00 to - 1.00
Square and
hexagon
≥ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 105
+ 0 to - 0.090
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.160
+ 0 to - 0.250

 

Tolerances of Turned ASTM B160 Nickel 200 Round Bar (BS 970-3)

Turned Nickel 200 round bar Tolerances
Nickel 200 round bar Size, diameter Permitted variation
mm mm
≧ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 120
> 120 ≦ 180
> 180 ≦ 250
> 250 ≦ 315
> 315 ≦ 400
> 400
+ 0 to - 0.070
+ 0 to - 0.085
+ 0 to - 0.100
+ 0 to - 0.120
+ 0 to - 0.140
+ 0 to - 0.160
+ 0 to - 0.185
+ 0 to - 0.210
+ 0 to - 0.230
+ 0 to - 0.250

 

Tolerances of Precision Nickel WERKSTOFF NR. 2.4066 Round Bar (BS 970-3)

Precision Nickel Alloy 200 Round Bar Tolerances
Section Size,
diameter
Permitted overall variation
Class A Class B Class C
mm mm mm mm
Round ≧ 6 <75 0.05 0.025 0.013

 

Tolerance of Nickel UNS N02200 Bright Round Bar (BS EN ISO 286-2 )

Nickel 200 round bar Tolerance ISO “H” Series in MM
NOMINAL SIZE h5 h6 h7 h8 h9 H10 H11 h12
DIAMETER mm
~ to 3 +0.004/0 +0.006/0 +0.01/0 +0.014/0 +0.025/0 +0.04/0 +0.06/0 +0.1/0
over 3 to 6 +0.005/0 +0.008/0 +0.012/0 +0.018/0 +0.03/0 +0.048/0 +0.075/0 +0.12/0
over 6 to 10 +0.006/0 +0.009/0 +0.015/0 +0.022/0 +0.036/0 +0.058/0 +0.09/0 +0.15/0
over 10 to 18 +0.008/0 +0.011/0 +0.018/0 +0.027/0 +0.043/0 +0.07/0 +0.11/0 +0.18/0
over 18 to 30 +0.009/0 +0.013/0 +0.021/0 +0.033/0 +0.052/0 +0.084/0 +0.13/0 +0.21/0
over 30 to 50 +0.011/0 +0.016/0 +0.025/0 +0.039/0 +0.062/0 +0.1/0 +0.16/0 +0.25/0
over 50 to 80 +0.013/0 +0.019/0 +0.03/0 +0.046/0 +0.074/0 +0.12/0 +0.19/0 +0.3/0
over 80 to 120 +0.015/0 +0.022/0 +0.035/0 +0.054/0 +0.087/0 +0.14/0 +0.22/0 +0.35/0
over 120 to 180 +0.018/0 +0.025/0 +0.04/0 +0.063/0 +0.1/0 +0.16/0 +0.25/0 +0.4/0
over 180 to 250 +0.02/0 +0.029/0 +0.046/0 +0.072/0 +0.115/0 +0.185/0 +0.29/0 +0.46/0

 

Alloy 200 Round Bar Sizes

The sizes of Nickel UNS N02200 Bars can also be selected when using the THD model.

Size & Dimensions of Nickel 200 round bar
Metric US Bar ASTM/ Canadian Japanese
Bar Size Diam. (mm) Bar Size Diam. (Inch) Bar Size Diam. (mm2) Bar Size Diam. (mm)
5 5 #2 0.250 10M 100 6 6
5.5 5.5 #3 0.375 15M 200 10 10
6 6 #4 0.500 20M 300 13 13
7 7 #5 0.601 25M 500 16 16
8 8 #6 0.750 30M 700 19 19
9 9 #7 0.875 35M 1000 22 22
10 10 #8 1.000 45M 1500 25 25
11 11 #9 1.125 55M 2500 29 29
12 12 #10 1.250 32 32
14 14 #11 1.375 35 35
16 16 #12 1.500 38 38
18 18 #13 1.601 41 41
20 20 #14 1.750 44 44
22 22 #15 1.875 48 48
25 25 #16 2.000 51 51
28 28 #18 2.250 57 57
32 32
36 36
40 40
44 44
50 50

Prestige quality Nickel 200 round bar suppliers offer variety of shapes such as Round Bar, Square Bar, Hexagonal Bar, Flat Bar, Channels & Hollow Bar.

Type SIZES (mm) SIZES (Inches) ISO Tolerance
Cold Drawn and Polish Round Bar 3.00 – 75.00 1/8" – 3.00" h8-h9-h10-h11
Cold Drawn and Ground Bar 10.00 – 75.00 5/6" – 2.50" h8-h9-h10-h11
Peeled and Polished Round Bar 40.00 – 150.00 1.50" – 6.00" h11, h11-DIN 1013
Peeled and Ground Bar 20.00 – 50.00 3/4″ – 2.00" h9-h10-h11

Nickel UNS N02200 Bars Standard lengths of 2000 mm up to 6010 mm. Cut to size on request (tolerance +2/-0 mm).

 

200 Nickel Round Bar Length

  • Metric system: standard length is 9 - 12 metres
  • USA : 40 feet

 

Nickel 200 Round Bar Weights

Nickel 200 Round Bar Weight Chart

Round Bar
Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr
3mm 0.017 0.055 20mm 0.753 2.470 3" 10.900 35.762
1/8" 0.019 0.062 22mm 0.908 2.979 3-1/4" 12.800 41.996
5/32" 0.029 0.095 7/8" 0.926 3.038 3-1/2" 14.850 48.772
4mm 0.030 0.098 24mm 1.080 3.543 3-3/4" 17.001 55.780
3/16" 0.043 0.141 25mm 1.180 3.871 4" 19.306 63.340
5mm 0.047 0.154 1" 1.210 3.970 4-1/4" 21.908 72.249
7/32" 0.058 0.190 26mm 1.271 4.170 4-1/2" 24.4487 80.340
6mm 0.068 0.223 27mm 1.368 4.490 4-3/4" 27.366 90.249
1/4" 0.076 0.249 1-1/8" 1.534 5.033 5" 30.461 99.940
7mm 0.091 0.298 30mm 1.691 5.548 5-1/2" 36.690 121.000
5/16" 0.118 0.387 1-1/4" 1.924 6.349 6" 43.860 143.900
8mm 0.120 0.398 32mm 1.894 6.314 6-1/2" 51.093 167.630
9mm 0.152 0.498 1-3/8" 2.303 7.550 7" 59.432 196.000
3/8" 0.170 0.557 35mm 2.390 7.553 7-1/2" 68.226 225.000
10mm 0.189 0.620 36mm 2.438 7.999 8" 77.586 254.55
11mm 0.228 0.748 38mm 2.792 8.903 10" 121.048 397.140
7/16" 0.232 0.761 1-1/2" 2.715 8.951      
12mm 0.271 0.889 40mm 3.009 9.872      
1/2" 0.303 0.994 1-5/8" 3.200 10.449      
13mm 0.318 1.043 1-3/4" 3.712 12.179      
14mm 0.368 1.207 45mm 3.807 12.555      
9/16" 0.383 1.256 1-7/8" 4.260 13.977      
15mm 0.424 1.391 48mm 4.330 14.205      
5/8" 0.473 1.551 50mm 4.698 15.414      
16mm 0.481 1.578 2" 4.848 15.906      
17mm 0.543 1.791 2-1/8" 5.475 17.963      
11/16" 0.573 1.880 2-1/4" 6.135 20.128      
18mm 0.610 2.001 60mm 6.768 22.205      
3/4" 0.682 2.237 2-3/8" 6.838 22.435      
      2-1/2" 7.576 24.856      
      2-5/8" 8.354 27.409      
      2-3/4" 9.169 30.083

 

Nickel 200 round bar Equivalent

ALLOY STANDARD DN-Trade Name DIN WERKSTOFF NR. UNS GOST AFNOR JIS BS EN
Nickel 200 R-Nickel 99.2 DIN 17740 2.4066 N02200 НП-2 N-100M NW 2200 NA 11 Ni 99.2

 

Nickel 200 round bar Material Properties

Nickel UNS N02200 Round Bar Chemical Composition

Grade Ni Fe C Mn Si Cu Mg Ti S
Nickel 200 99.0 min 0.4 max 0.15 max 0.35 max 0.1 max 0.25 max - - 0.01 max

 

Mechanical Properties of Nickel UNS N02200 Bar

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

 

Nickel 200 Round Bar for Sale

UNS N02200 Square rod Alloy ASTM B160 Polished Flat rod
UNS N02200 Alloy 200 Rectangular rod Cold Drawn Alloy 200 Polished Square rod
ASTM B160 Alloy 200 Rectangular rod stock Alloy 2200 Polished rod Stock
Alloy 200 Threaded rod M12 Alloy 200 ASTM B160 Threaded rod Stock
Alloy 200 Hex rod Cold Drawn 2.4066 Alloy 200 Triangular rod
Alloy 200 Square rod Bright 200 Alloy Bright rod Cold Drawn
2.4066 Alloy 200 Threaded rod M16 Alloy 200 Threaded Rods
Alloy 200 Square rod Annealed ASTM B160 Alloy Bright rod Flat
200 Alloy Square rod Black Alloy UNS N02200 Black rod
Alloy 200 ASTM B160 Hex rod Black Alloy 200 Square Rod
N02200 Alloy Rectangular rod Black Alloy 200 Bright rod Hex
2.4066 Alloy 200 Rectangular rod Polished Alloy 200 UNS N02200 Polished Round rod
Alloy 200 Rectangular rod Bright N02200 Alloy Bright rod Hollow

 

Nickel UNS N02200 Round Bar Uses

There are many sectors and industries consuming ASTM B160 Nickel 200 Round Bar like:

for Automobile Industries to make nuts, bolts, shafts Heavy engineering Industries
Textile industry for Electric pumps / motors
to manufacturing conveyor shafts used in Agricultural sector
Railway engines and coaches to making arms and ammunition
for manufacturing gears, bearings, and hinges to produce Cold headed components

 

Don't forget to check our price for Nickel 200 round bar in following States

Kerala
Karnataka
Andhra Pradesh
Gujarat
Maharashtra
Uttar Pradesh
Jharkhand
Bihar
Noida
Delhi 
Tamil Nadu
West Bengal

 

We have attractive price list for 200 Nickel Rod in following countries

Iraq
United Arab Emirates
Bahrain
Kuwait
Oman
Saudi Arabia(KSA)
Qatar

 

Cut to size Nickel 200 Bar Stock, manufacturers of Nickel 200 Alloy Bright Bars, Alloy 200 Nickel Rounds, stockholder of Ni 200 Alloy Square Bar in India, wholesaler of Alloy 200 Cold Finished Bar, ASTM B160 Alloy 200 Threaded Bar in Mumbai
Hot sale of No 2200 Nickel Round Bar Stock, suppliers of Ni Alloy 200 Forged Bar, Nickel N02200 Alloy Hexagon Bars, stockist of Nickel 2200 Polished Bar, dealer of Nickel Alloy UNS No 2200 Hot Rolled Bar traders of Nickel WERKSTOFF NR. 2.4066 Rectangular Bar